Product ID:TONER CARTRIDGE 5A0025B01
MSDS Date:02/01/1994
FSC:6850
NIIN:00N059844
MSDS Number: BXQWR

GENICOM CORP

ONE GENICOM DR
WAYNESBORO, VA 22980-1999
US

Emergency Phone: 703-949-1000

Info Phone: 703-949-1243

Preparer: ROGER L COATS

Cage: 01526

GENICOM CORP

WAYNESBORO, VA 22980-1999 US

Telephone: 703-949-1000

Cage: 01526

ACRYLIC ACID BUTYL ESTER POLYMER WITH STYRENE;

CAS: 25767-47-9

Fraction By Weight: 70-99%

OSHA PEL N/K

ACGIH TLV: N/K

PROPENE POLYMERS; (1-PROPENE POLYMER)

CAS: 9003-07-0

RTECS: TR5000000

Fraction By Weight: 3-7%

OSHA PEL N/K

ACGIH TLV: N/K

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 3-7%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3

SOLVENT BLACK 7; (AZINE DYE (C.I. SOLVENT BLACK))

CAS: 8005-02-5

Fraction By Weight: 1-3%

OSHA PEL N/K

ACGIH TLV: N/K

SILANE, DICHLORODIMETHYL-, REACTION PRODUCTS WITH SILICA;

CAS: 68611-44-9

Fraction By Weight: 0.1-1%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: IRRITATION OF THE NOSE AND
THROAT MAY OCCUR WITH INHALATION OF TONER DUST. CHRONIC: REPEATED
INHALATION OF HIGH CONCENTRATIONS OF TONER DUST HAS CAUSED LUNG
EFFECTS AND DAMAGE IN LABORATORY ANI MALS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:IRRITATION TO THE EYES, NOSE, OR THROAT.
NAUSEA, HEADACHE OR DIZZINESS.
Medical Cond Aggravated by Exposure:EXISTING RESPIRATORY CONDITIONS MAY
BE AGGRAVATED.

First Aid:INHALATION: REMOVE TO FRESH AIR IF EFFECTS OCCUR, CONSULT
MEDICAL PERSONNEL. EYES: IMMEDIATELY FLUSH WITH WATER FOR AT LEAST
15 MINUTES. SKIN: FLUSH WITH COPIOUS AMOUNTS OF WATER. SEE MD .
INGES TION: CALL MD IMMEDIATELY .

Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:SWEEP OR VACUUM UP SPILLED MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN A COOL, DRY, WELL-VENTILATED
PLACE. DO NOT STORE ABOVE 95F.
Other Precautions:NONE.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD SAFETY GLASSES .
Other Protective Equipment:NONE REQUIRED FOR NORMAL USE.
Work Hygienic Practices:NORMAL WORKPLACE HYGIENIC PRACTICE IS
SUFFICIENT. AVOID INHALING DUST.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Melt/Freeze Pt:M.P/F.P Text:>95F,>35C
Spec Gravity:1.1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FINE, BLACK POWDER WITH SLIGHT ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS.
Stability Condition to Avoid:ELECTRICAL (STATIC) DISCHARGE WHEN
AIRBORNE CONCENTRATIONS OF DUST ARE ABNORMALLY HIGH.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS ).

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.